~ lighting Crown PZM10BLK ~
dj gear. ~ Crown PZM10BLK Crown PZM10BLK Description: PZM Series PZM (Pressure Zone Microphone) Series are omnidirectional boundary microphones. ~ They can be placed on a large surface such as a table, floor, wall, or lectern. ~ PZMs prevent phase interference from surface reflections, allowing a wide, smooth response. ~ Microphone sensitivity is boosted 6 dB by the surface mounting. ~ Crown PZM Series microphones offer serious tools for the sound reinforcement and recording professional, as well as cost-effective solutions for a variety of other needs. ~ As the first licensed manufacturer of the Pressure Recording Process (the foundation of PZM technology), Crown has developed the most successful line of PZM microphones available today. ~ Crown PZM Series microphones let the user optimally place microphones in the performance venue. ~ Designed for use on flat surfaces, PZMs can be placed where conventional microphones do not work well. ~ Their wide, smooth frequency response makes them ideal for miking pianos, harps and other orchestral instruments. ~ Their small size and low profile also make them an excellent choice for recording projects, conference rooms and security applications. ~ These technical innovations, combined with numerous others, give Crown a leading edge in bringing high-quality PZM products to the market. ~ Crown PZM10BLK Specifications: Transducer type: Electret condenser. ~ Frequency response (typical): PZM-10: 80 Hz to 20, 000 Hz. ~ PZM- 10LL: 100 Hz to 20, 000 Hz. ~ Polar pattern: Hemispherical. ~ Impedance: PZM-10: 240 ohms, balanced. ~ PZM-10LL: 75 ohms, balanced. ~ Recommended minimum load impedance 1000 ohms. ~ Open circuit sensitivity: PZM-10: 2.5 mV/Pa* (-52 dBV/Pa). ~ PZM-10LL: 1.4V/Pa* (+3 dBV/Pa). ~ Power sensitivity: PZM-10: -52 dBm/Pa*. ~ PZM-10LL: +8 dBm/Pa*. ~ Equivalent noise level (self-noise): 26 dB SPL typical (0 dB = .0002 dyne/cm2), A-weighted. ~ S/N Ratio: 68 dB at 94 dB SPL. ~ Maximum SPL: 120 dB SPL produces 3% THD. ~ Operating voltage: PZM-10: 12 to 48V phantom power, positive voltage on pins 2 and 3 with respect to pin 1. ~ PZM-10LL: 12 to 24V DC, positive voltage on red lead with respect to shield. ~ Polarity: PZM-10: Positive pressure on the diaphragm produces a positive voltage on pin 2 with respect to pin 3 of output connector. ~ PZM-10LL: Positive pressure on the diaphragm produces a positive voltage on white lead with respect to black lead. ~ Current drain: PZM-10: 400 microamperes. ~ PZM-10LL: 2.8 mA at 12V DC, 4.22 mA at 24V DC. ~ Output connectors: PZM-10: Male XLR type (3-pin pro audio). ~ PZM- 10LL: None. ~ Cable: PZM-10: None supplied. ~ Use 2-conductor shielded mic cable. ~ PZM-10LL: 12-in., permanently attached 3-conductor shielded cable. ~ Red: B+, White: audio+, Black: audio-, Shield: ground. ~ Materials: Steel plate and housing. ~ Finish: Off-white. ~ May be painted any color; take care to fi rst seal the opening between the capsule and boundary plate. ~ Model PZM-10BLK has a black fi nish, and can be custom ordered from your Crown dealer. ~ Net weight: PZM-10: 2.6 oz. ~ (73.6 lighting; dj gear; drum sticks; orchesta percussion; electric drums; acoustic drums; percussion; drums; midi; sound modules; groove stations; arrangers; portable keyboards; digital pianos; workstations; synths; electric bass; bass; amps; acoustic guitar; electric guitar; musical instruments;