~ lighting Crown PZM10 ~
dj gear. ~ Crown PZM10 Crown PZM10 Description: PZM-10: A low-profile microphone featuring a cylindrical design for ceiling, wall or tabletop installations. ~ Intelligibility is excellent, with low frequencies below the voice range rolled off to reduce the pickup of HVAC rumble. ~ XLR connector, phantom powered. ~ PZM-10BLK: Same as the PZM-10 but in Black. ~ PZM-10LL: Same as the PZM-10 but line-level output. ~ Pigtail output, powered by 12-14V DC (not phantom power). ~ PZM (Pressure Zone Microphone ) series microphones are omnidirectional boundary microphones. ~ They can be placed on a large surface such as a table, floor, wall, or lectern. ~ PZMs prevent phase interference from surface reflections, allowing a wide, smooth response. ~ Microphone sensitivity is boosted 6 dB by the surface mounting. ~ Crown's PZM series of pressure zone microphones offer serious tools for the sound reinforcement and recording professional, as well as cost-effective solutions for a variety of other needs. ~ As the first licensed manufacturer of the Pressure Recording Process (the foundation of PZM technology), Crown has developed the most successful line of PZM microphones available today. ~ Crown PZM series microphones let the user optimally place microphones in the performance venue. ~ Designed for use on flat surfaces, PZMs can be placed where conventional microphones do not work well. ~ Their wide, smooth frequency response makes them ideal for miking pianos, harps and other orchestral instruments. ~ Their small size and low profile also make them an excellent choice for recording projects, conference rooms and security applications. ~ These technical innovations, combined with numerous others, give Crown a leading edge in bringing high-quality PZM products to the market. ~ Crown PZM10 Specifications: Transducer type: Electret condenser Frequency response (typical): 80 Hz to 20, 000 Hz. ~ See Fig. ~ 1. ~ Polar pattern: Hemispherical Impedance: 240 ohms, balanced. ~ Recommended minimum load impedance 1000 ohms Open circuit sensitivity: 2.5 mV/Pa* (-52 dBV/Pa) Power sensitivity: -52 dBm/Pa* Equivalent noise level (self-noise): 26 dB SPL typical (0 dB = .0002 dyne/cm2), A-weighted S/N Ratio: 68 dB at 94 dB SPL Maximum SPL: 120 dB SPL produces 3% THD Operating voltage: 12 to 48 V phantom power, positive voltage on pins 2 and 3 with respect to pin 1 Polarity: Positive pressure on the diaphragm produces a positive voltage on pin 2 with respect to pin 3 of output connector Current drain: 400 microamperes Output connectors: Male XLR type (3-pin pro audio) Cable: None supplied. ~ Use 2-conductor shielded mic cable Materials: Steel plate and housing Finish: Off-white. ~ May be painted any color; take care to first seal the opening between the capsule and boundary plate Net weight: 2.6 oz. ~ (73.6 g) Get your Crown PZM10 today! lighting; dj gear; drum sticks; orchesta percussion; electric drums; acoustic drums; percussion; drums; midi; sound modules; groove stations; arrangers; portable keyboards; digital pianos; workstations; synths; electric bass; bass; amps; acoustic guitar; electric guitar; musical instruments;