~ lighting Crown CM200A ~
dj gear. ~ Crown CM200A Crown CM200A Description: The Crown CM-200A and CM-200ASW are cardioid condenser microphones for professional vocal and instrumental use. ~ They offer studio quality sound, yet are rugged enough to withstand hard professional use in the field. ~ Their outstanding performance is complemented with handsome styling and a comfortable balance. ~ The CM-200A and CM-200ASW are identical except that the CM-200ASW has an on-off switch in the handle. ~ It is a silent-operating magnetic reed switch. ~ The sound of the CM-200A or CM-200ASW is smooth and non-harsh- yet very articulate- with a wider frequency range than standard vocal microphones. ~ When used up-close, its proximity effect boosts the low-frequency response for a warm, robust sound. ~ An upper-midrange "presence peak" adds intelligibility. ~ The cardioid polar pattern increases gain-beforefeedback, rejects unwanted background noise, and discriminates against sounds approaching the rear of the microphone. ~ A built-in multi-stage pop filter effectively suppresses explosive breath sounds. ~ Handling noise is extremely low. ~ The unit can withstand repeated drops and abuse, as well as extremely loud sound pressure levels without distortion. ~ The output of the microphone is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss. ~ The unit can be phantom powered from the console or other remote power supply. ~ Included with the CM-200A and CM-200ASW is a convenient carrying pouch, an adjustable microphone stand adapter for mounting the unit to any microphone stand, and a foam windscreen to further reduce breath popping and wind noise. ~ Crown CM200A Features: Cardioid polar pattern reduces feedback and background noise. ~ Smooth, articulate sound with up-close bass boost. ~ Built rugged for the road. ~ Handsome styling and comfortable balance. ~ Multi-stage pop filter, low handling noise. ~ Crown CM200A Specifications: Type: Cardioid condenser vocal-instrumental microphone Element: Electret condenser Frequency Response (typical): 80 Hz to 15, 000 Hz Polar Pattern: Cardioid Impedance: 150 ohms nominal, 200 ohms actual, balanced Recommended minimum load impedance: 1000 ohms Open Circuit Sensitivity (48 V supply): 3.0 mV/Pa (-53 dBV/Pa) Power Sensitivity: -52 dBm/Pa Equivalent Noise Level (self-noise): 21.5 dB SPL typical, A-weighted. ~ S/N Ratio: 72.5 dB at 94 dB SPL Maximum SPL for 3% THD: 151 dB SPL with 48V supply; 143 dB SPL with 12V supply Polarity: Positive pressure on the diaphragm produces a positive voltage on pin 2 with respect to pin 3 of output connector Operating Voltage: Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of output connector Current Drain: 1.7 mA Materials: Rugged aluminum alloy housing, steel grille Finish: Satin black Cable: None supplied; use 2-conductor shielded microphone cable Connector: 3-pin male XLR type Net Weight: 7 oz. ~ (199 g) Included Accessories: Carrying pouch, ASA-2 microphone stand adapter and WS- lighting; dj gear; drum sticks; orchesta percussion; electric drums; acoustic drums; percussion; drums; midi; sound modules; groove stations; arrangers; portable keyboards; digital pianos; workstations; synths; electric bass; bass; amps; acoustic guitar; electric guitar; musical instruments;