~ lighting Crate TX15 ~
dj gear. ~ Crate TX15 Crate TX15 Description: If you're the type of performer who requires the ultimate in portability, but refuse to sacrifice tone for mobility, the Crate TX15 was made for you. ~ With up to eight hours of battery power, Taxi lets you leave the wall outlets far behind. ~ Dual channels allow you to control two instruments, or plug in your guitar and use the handy 1/4" & XLR combo input jack for a high-quality vocal mic. ~ The specially designed 8" woofer and tweeter ensure clean, loud, full-range performance that will astound you. ~ Perfect for solo performers who want to play and sing, or use a CD player/drum machine in remote areas, the TX15 includes a 120V charger/adapter for standard operation and recharging the battery. ~ Crate TX15 Front Panel: 1. ~ INPUT 1: Use this jack to connect a low or a high impedance microphone to the amplifier by means of a shielded signal cable. ~ 2. ~ VOLUME 1: Use this control to adjust the level of the signal connected to the Input 1 jack (#1). ~ 3. ~ INPUT 2: Use this jack to connect an instrument or a high impedance microphone to the amplifier by means of a shielded instrument or signal cable. ~ 4. ~ VOLUME 2: Use this control to adjust the level of the signal connected to the Input 2 jack (#3). ~ 5. ~ LOW: Use this control to adjust the level of the low frequencies for both inputs. ~ 6. ~ LOW MID: Use this control to adjust the level of the lower-middle frequencies for both inputs. ~ 7. ~ HIGH MID: Use this control to adjust the level of the upper-middle frequencies for both inputs. ~ 8. ~ HIGH: Use this control to adjust the level of the high frequencies for both inputs. ~ 9. ~ CD INPUT: Use these jacks to connect the output of a CD player, a tape player, a rhythm machine or any other similar source to the amplifier by means of a shielded signal cable. ~ These jacks are connected in parallel - a stereo signal should be connected to both jacks (the left channel to one jack, the right channel to the other), while a mono signal may be connected to either jack. ~ 10. ~ HEADPHONES: Use this jack to connect a pair of stereo headphones to the amplifier. ~ The internal speaker is disconnected when the headphones jack is used. ~ 11. ~ LED: When the power switch is on and the battery is fully charged, this LED illuminates yellow. ~ The LED illuminates red when the battery needs recharging. ~ 12. ~ POWER: Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switch depressed). ~ Crate TX15 Rear Panel: 13. ~ DC CHARGER PLUG: Use this jack to connect the 15VDC charger to the amplifier to recharge the battery (power switch off) or to supply power to the amplifier while playing (power switch on). ~ Plug the charger into an AC outlet of the proper voltage as listed on the charger. ~ NOTE: The 15VDC charger will recharge the amplifier's battery only when the amp is not being played. ~ If the amplifier is being played while the charger is connected and plugged into a source of AC power, the battery will neither charge or discharge. ~ 14. ~ LED: This LE lighting; dj gear; drum sticks; orchesta percussion; electric drums; acoustic drums; percussion; drums; midi; sound modules; groove stations; arrangers; portable keyboards; digital pianos; workstations; synths; electric bass; bass; amps; acoustic guitar; electric guitar; musical instruments;